How To Clean Up After a Water Heater Failure
Follow These Six Steps To Clean Up The Mess
Keeping an eye on your water heater is wise. A leaking water heater is relatively common, and if caught early, will not result in total failure and flooding. However, if flooding occurs, any water mitigation company in Pine Ridge, FL, will tell you to follow six steps to clean up the mess.
- Shut off the gas.
- Shut off the water supply.
- Drain the tank.
- Document the scene.
- Remove excess water.
- Dry the space.
Shut Off the Gas
If you're dealing with a failed water heater, the first thing to do is shut off the gas or power. For gas models, locate the temperature dial on the thermostat, turning it firmly off. For electric models, find the appropriate breaker and throw the switch.
Shut Off the Water Supply
The next crucial step is to stop the leak from a broken water heater. Locate the main water supply valve at the top of the tank and turn clockwise to shut it off. If you can't reach the valve on the tank, locate the primary supply for the house and shut it off instead.
Drain the Tank
Even after the water supply is shut off, you may still have a leaking water heater. Find a hose and attach it to the drain valve, placing the opposite end of the hose outside.
Document the Scene
Before doing anything else, document the scene for insurance purposes. Take pictures of flooded areas and any breaks in the tank. The insurance adjuster will want to see proof of the disaster.
Remove Excess Water
Once you have proof of the leak or flood, you can remove all excess water. Use a shop vacuum or pumps to help excavate the area.
Dry the Space
After removing the water, do your best to dry the space. Use fans and dehumidifiers to help remove excess moisture.
A leaking water heater can quickly become a burst appliance. Regular inspections of the heater can ensure you avoid significant problems.